Helmet Welding 97 x 62mm Premium Series

Toolex 598179 TECMEN Helmet Welding Premium Series 97 x 62mm

Features:

• Shade Control
• Grind / Sensitivity Control
• Delay Time Control
• Low Battery Indicator
• Battery Capacity Test
• Battery Replaceable 

Specifications:

• Optical Class: 1 /1 /1 /1
• Viewing Area: 97 x 62mm
• Cartridge Size: 133 x 114 x 9mm
• Arc Sensor: 4
• Light / Dark State: DIN 3.5 / DIN 5-8 / 9-13
• Shade Control: Internal, Variable Shade
• Power On/ Off: Fully Automatic
• Sensitivity Control: Low—High, Adjustable Infinitely
• UV/ IR Protection: Up to shade DIN16 at all times
• Power Supply: Solar cell. Battery Replaceable, 2 x CR2450 lithium battery
• Switching Time: 1/25,000 s. From light to dark
• Delay (Dark to light): 0.1 ~ 1.0s by dial control knob
• Low Amperage TIG Rated: ≥ 2 amps (DC); ≥ 2 amps (AC)
• Grinding: Yes
• Application range: MMA, TIG, TIG Pulse, MIG, MIG Pulse, Plasma Cutting, Plasma Welding, Arc Air Gouging, Grinding.
• Approved by: DINplus, CE, ANSI Z87.1, CSAZ94.3, AS/NZS 1338.1

WARNING - KEEP BUTTON BATTERIES OUT OF REACH OF CHILDREN

• Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the oesophagus.
• Never allow children to replace button batteries of any device.
• If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons Information Centre on 13 11 26 (Australia) for fast, expert advice.
• Regularly examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if compartment is not secure.
• Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.
• Tell others about the risk associated with button batteries and how to keep their children safe.