Loxeal 58-11 High Pressure Thread Sealant 50ml
$25.91
SKU
7170581
The Loxeal 58-11 High Pressure Thread Sealant 50ml is an anaerobic adhesive that is ideal for the sealing of threaded metal to metal joints. This Loxeal thread sealant seals against gas, water, LPG, hydrocarbons, oils and other chemicals. It replaces PTFE tape and yarn and gives instant sealing against moderate pressure. It seals against gas, water, LPG, hydrocarbons, oils and other chemicals. Thixotropic property prevents migration of sealant from thread before or during curing. Shock and vibrations resistant, sealing properties unaffected over the temperature range from -55°C to +150°C.
Bromic 7170581 Loxeal 58-11 High Pressure Thread Sealant 50ml
Features:
- High viscosity – once oxygen is expelled from sealant it will activate and start to cure
- Drip proof
- Sealing unaffected by shock/vibration within temperature range: -55°C to + 150°C
- Rapid cure time - functional in less than 3 hrs
- Safe for use with potable water and AGA approved
- Not suitable for use on plastics
- Non-Toxic
- Made in Italy
Specifications:
- Application: Kitchen, Laundry, Bathroom
- For use with: LPG (Propane), NG, Water
- Pressure Rating (kPa): AGA approved to AS 4623:2008 - Class III (2000kPa), Approved by Loxeal s.r.l to 2,600 kPa
- Working Temp. Range (°C): -55 to +150
- No. of Tubes x Size (ml): 10 x 50ml
- Composition: Anaerobic Methacrylate
- Colour: Yellow
- Viscosity (25°C - mPa.5): 24,000 - 70,000 (high thixotrophy)
- Density (25°C - gr/ml): 1.05
- Max. Diameter of thread/gap filling: M 80 / 3° / 0.50mm
- Flash Point (°C): >100
- Shelf Life in Years (when stored at 23°C): 2
- Handling Cure Time: 15 - 30 minutes
- Functional Cure Time: 1-3 hours
- Full Cure Time: 3-6 hours
- Shear Strength: 6-12 N/mm²
- Locking Torque (breakaway & prevailing): 6-10 N/mm² & 2-4 N/mm²
- Elongation at Break: More than 100%
- AGA Approval No.: 5048
- Sealant/Lubricant Type: Sealants
| Model Number | 7170581 |
|---|---|
| Brand | Bromic |