Electrode Hard Facing 3.2mm Abrasacord 43 - 5kg

WIA AC4332 Electrode Hard Facing 3.2mm Abrasacord 43 - 5kg

Abrasocord 43 is a heavy coated, hard surfacing electrode depositing extremely hard, abrasion resistant Chromium/  Niobium carbides in an austenitic matrix. It is ideal for hard surfacing applications where resistance to extreme abrasion  (in particular sliding abrasion) and moderate to heavy impact  are required. Due to the nodular shape of the complex  carbides, Abrasocord 43 deposits are capable of withstanding heavier impact levels than standard chromium carbide grades. Typical applications include bucket teeth/lips, grizzlies, press screws, crusher hammers and ripper teeth to name but a few. Abrasocord 43 deposits are non-machineable, grindable,  prone to fine relief checking and should be restricted to 3 layers high. While two layers of Abrasocord 43 may be  required for maximum wear resistance, this complex carbide alloy has lower dilution sensitivity than straight chromium carbide deposits. 

Summary:

• Tough, Wear Resistant Complex Carbide Type Deposit
• For Hard Surfacing Components Subjected to Extreme Abrasion and Moderate to Heavy Impact
• Similar Deposit Type to Tubecord E-2460

Classification:

• AS/NZS 2576: 2465-A4 

Typical Applications:

Suitable for applications where resistance to extreme abrasion and moderate to heavy impact are required, such as press screw, grozzly bars, crusher hammers, ripper teeth and shovel teeth.

Identification:

• Coating - Black
• Tip - Plain
• Imprint - WIA AC 43 

Specifications:

• Electrode Size - 3.2mm
• Electrode Length - 380mm
• Welding Current Range* (A) - 115 - 140A
  • (*Recommended electrical stick out is 15-20mm. Welding Current DC)
• Arc Voltage Range ** (V) - 19V
  • (**Voltage is determined by arc current and wire arc length. Welding currents and voltage shown are operational guides only.