Loctite 7414 Torque Marque Blue Thread Lock 50ml

Loctite 7414-50ML Loctite 7414 Torque Marque Blue Thread Lock 50ml

Features:

• LOCTITE SF 7414 is a blue, high viscosity, the solvent-based fast-drying paste used to visually detect any movement in the adjustment of parts
• The product has been developed for use on compression fittings, studs, nuts, parts and assemblies after they have been set to the correct torque, tension or position, thus providing an inexpensive method for warranty protection
• It demonstrates excellent adhesion to metals

Application:

• Suitable for use on compression fittings, studs, nuts, parts and assemblies after they have been set to proper tension or position.

Benefits:

• For general purpose use
• Provides clear visual indication
• Ideal for warranty protection
• Non-corrosive can be used outside

Directions for Use:

1. Apply a bead of Loctite 7414 Torque Marque across the fastener / component interface.
2. Replace cap immediately after every use to prevent the product from drying out in the tube. 
3. Allow 1 to 2 minutes for the product to surface dry.
4. Tamper detection achieved when fully dry (circa 24 hours).
5. Any future adjustment of the parts would cause the seal to fracture allowing easy visual detection of any tampering.

Specifications:

• Typical Use - Used for detecting movement in the adjustment of metal parts.
• Chemical Composition - Solvent
• Colour - Blue
• Components - 1 part
• Flash Point - 30 °C
• Service Temperature: -35 to 145 °C
• Specific Gravity - 1.2
• Spray - No
• Viscosity - 90,000 to 120,000