12V Max Li-ion Cordless Hammer Driver Drill

Makita HP333DZ 12V Max Li-ion Cordless Hammer Driver Drill - Skin Only

The 12V Max Hammer Driver Drill, HP333DZ, is ideal for drilling applications in narrow or tight spaces due to its compact and lightweight design. The 2 speed mechanical gearing and 20-stage torque ring enable the user to adjust for the required application. The HP333D is comfortable to use with the enhanced anvil holder rigidity reducing bit wobble.

Features:

• Enhanced Anvil Holder Rigidity allows change from needle bearing to ball bearing reduces bit wobble
• Rigid 10mm (3/8”) Keyless Chuck allows user to quickly change between drill bits by unscrewing and tightening the drill chuck
• Torque Settings with 20 stages plus drill mode provide ultimate control for the task at hand
• LED Job Light with pre-glow and after glow function, lights up the work piece making it easier to view the work area
• Variable Speed Trigger has been designed so that the drill speed can be easily controlled by the trigger
• Mechanical 2 Speed Gearing provides the user with more control of the tool, allowing selection between 2 speeds
• Ergonomic Design lightweight and more compact than previous model

Specifications:

• Voltage: 12V Max
• Max drilling capacities:
• Wood: 21mm
• Steel: 10mm
• Masonry: 8mm
• No load speed:
• Hi: 0 - 1700rpm
• Lo: 0 - 450rpm
• Impact rate:
• Hi: 0 - 25,500ipm
• Lo: 0 - 6750ipm
• Max torque lock: 28Nm
• Max tightening torque:
• Hard: 30Nm
• Soft: 14Nm
• Length: 193mm
• Weight: 0.93kg

Warranty:

• 3 Years Warranty Covered By Makita Australia