18V 5.5Ah 450/500g Grease Gun Kit FP 18 LTX

Metabo AU60078902 18V 5.5Ah 450/500g Grease Gun Kit FP 18 LTX

Features:

• 2 flow rates/pressures: 100 g/min at 10000 psi or 290 g/min at 6000 psi
• 9 pre-set grease volumes plus continuous mode
• 3-way trigger: on, locked on or locked off
• Operate with bulk grease or cartridges
• Hose mounted LED light for added visibility in dark spaces
• Shoulder strap included

Specifications:

• Voltage - 18 V
• Barrel capacity - 450/500 g
• Hose length - 1200 mm

Metabo 627047000 12-36V Air Cooled Charger ASC 55

Features:

• Monitored charging with microcontroller
• Battery diagnosis
• Charge time approximately 30 minutes at 1.5 Ah
• "AIR COOLED" function
• For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
• Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
• Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
• "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.

Specifications:

• Voltage - 30-36V

Metabo 12-36V Air Cooled Charger ASC 55 627047000

Features:

• Monitored charging with microcontroller
• Battery diagnosis
• Charge time approximately 30 minutes at 1.5 Ah
• "AIR COOLED" function
• For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
• Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
• Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
• "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.

Specifications:

• Voltage - 30-36V