18V Li-ion Fuel Cordless 38mm Magnetic Drill Set

Milwaukee M18FMDP-0C 18V Li-ion Fuel Cordless 38mm Magnetic Drill Set - Skin Only

The M18 FUEL 38mm Magnetic Drill drills faster, delivers the strongest magnetic hold on 6mm steel providing a safer drilling environment in this material, and drills over (40) 20mm holes per charge.The M18 FUEL 38mm Magnetic Drill delivers safer drilling on 6mm steel by providing the industry’s strongest holding force on this material. By utilising permanent magnets, the magnetic base operates without electricity; ensuring that the magnet does not deactivate if the battery is drained. Equipped with Auto-Stop lift-off detection, power to the motor is automatically cut if excess rotational motion is detected while drilling.

Powered by a MILWAUKEE POWERSTATE Brushless Motor, both drills are faster than their corded counterparts, and deliver the same 38mm annular cutter capacity. REDLINK PLUS Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. REDLITHIUM-ION 5.0Ah batteries provide over (40) 20mm holes in 6mm steel, while delivering the most durable pack construction on the market, and maximum recharges.

Includes:

• 1 x FUEL® Hard Case
• 1 x 3/4" Weldon to 1/2" Chuck adaptor
• 1 x Chuck key
• 1 x Magnetic lubrication tank
• 1 x Safety strap
• 1 x 1" Retractable pilot pin

Features:

• POWERSTATE™ brushless motor delivers maximum power and longer motor life
• REDLINK PLUS™ intellegence provides optimised performance and overload protection
• Self powered magnet base delivers up to 900 kg of holding force
• 3/4" Weldon to 1/2" Chuck Adaptor
• 38 mm Annular cutter capacity and 13mm twist bit capacity
• 2 Speed gearbox (400 / 600 rpm)
• Equiped with Auto-Stop lift off detection
• On board cutting oil canister for customised applications
• Built in LED light to illuminate the work surface
• Drills 40 x 20 mm holes on 6 mm plate on one charge

Specifications:

• Voltage: 18V
• Speed: 400 / 600rpm
• Holding Force: 900kg
• Max Annular Cutting: 38mm
• Max Twist Bit: 13mm
• Minimum plate thickness: 6mm
• Feed length:
• Drill: 130mm
• Tool: 146mm
• LED light: Yes
• Tool Size:
  • Width: 355mm
  • Height: 395mm
  • Weight: 13.38kg