18V XR Li-ion Cordless Brushless Concrete Angled Nailer Kit

$1,559.00
SKU
DCN890P2-XE
Barcode
5035048666890

The DCN890 concrete nailer is the first battery tool able to drive 13mm nails into steel as well as up to 57mm into concrete. Pin range includes standard for concrete, Hd for high shear loads and XH for extra hard concrete and steel (13mm only).

DeWalt DCN890P2-XE 18V XR Li-ion Cordless Brushless Concrete Angled Nailer Combo Kit

DeWalt DCN890N-XE 18V XR Li-ion Cordless Brushless Concrete Angled Nailer - Skin Only

Features:

  • Easy Maintenace:
  • Replace driver blade under 2 minutes
  • Field serviceable by user
  • Tool-Free Stall Release returns driver if too is stalled or jammed
  • Removable Nose Piece:
  • Interchangeable for versatility(MEPD)
  • Allows tool-free maintenance
  • Brushless Motor with a comparable speed to gas nailer & compact design
  • Gas Free Operation & consistency in wide temperature and altitudinal ranges
  • Application versatility with Single/Rapid Mode & Power Adjustment:
  • 3 setting for pin depth adjustment
  • Featured Magazine:
  • Angled for access in tight areas
  • Removeable for tool-free maintenace
  • High capacity(33pins)
  • Dual LEDS
  • Illuminate work surface
  • Provide diagnostics on tool

Specifications:

  • Voltage: 18V
  • Trigger Type: Bump and Sequential Rapid Cycle
  • Magazine Capacity: 30
  • Magazine Type: Angled
  • Magazine Capacity: 33
  • Reach Into Track: 68mm
  • Fastener Type: 15° Plastic Collated Nails
  • Fastener Range: 13-57mm
  • Recoil (at trigger):
    • Concrete: 5.0
    • Steel: 6.2
  • Weight: 4.2kg

Warranty:

  • 3 Years Warranty Covered By Dewalt Australia

DeWalt DCB184-XE 18V 5.0Ah XR Li-Ion Cordless Slide Battery - DCB184-XE

Features:

  • Deliver 66% more runtime than a standard 3.0Ah battery pack
  • LED state of charge indicator to help manage pack charging
  • Lightweight design that provides the user with upgraded 5.0Ah power without increasing the size or weight over the 18V 3.0Ah battery pack
  • No memory effect and virtually no self-discharge for maximum productivity & less downtime
  • Protection against overheating, overloading and deep discharge conditions which increases the overall battery life
  • Compatible with all DEWALT XR Li-Ion 18V Tools

Specifications:

  • Voltage: 18V
  • Battery type: Slide
  • Amps: 5.0Ah
  • Weight: 0.6kg

Warranty:

  • 3 Years Warranty Covered By Dewalt Australia

DeWalt DCB115-XE XR Li-ion Cordless 10.8V - 18V Multi-voltage Charger - DCB115-XE

The DCB115-XE is easy to use, quiet and exceptionally stable, this DeWalt charger plugs directly into the wall. The DCB115-XE features a built-in diagnostics system with an LED indicator that communicates battery charging, battery charged, power line problem, replace battery and battery too hot or cold to charge.

Features:

  • Compatible with DeWalt 10.8V, 14.4V and 18V Li-ion slide batteries
  • Diagnostics with LED indicator for battery charge status of charged, charging, power line problem, replace pack or battery temperature problem
  • Wall mountable design

Specifications:

  • Voltage: 10.8V, 14.4V, 18V
  • Battery Chemistry: Li-ion
  • Dimensions (L X W X H): 120mm x 150mm x 100mm
  • Weight: 1kg

Warranty:

  • 3 Years Warranty Covered By Dewalt Australia
More Information
Model NumberDCN890P2-XE
gtin5035048666890
Kit Pieces 1
BrandDewalt
Copyright © 2020 Gasweld. All Rights Reserved.